MV4F
Jump to navigation
Jump to search
Board Scans - Set 1
This set is an older revision of the logic board compared to Set 2.
- The GND pin (10) on LS245 @ N2 is not connected. Its somewhat uncommon but this causes some sounds to have/be static. The GND pin is properly connected (underside of logic board) on the newer revision.
Scan Notes
- The battery and BIOS chip were removed.
- Any metal stand offs seen around the edge of the boards were use to level the board for scanning.
Board Scans - Set 2
- The battery and BIOS chip were removed.
- Any metal stand offs seen around the edge of the boards were use to level the board for scanning.