From MVS
Revision as of 02:05, 4 October 2018 by Ack (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

A couple notes on the scans:

  • This board was a little wider then my scanner and required stitching 2 scans together. The stitching is about an inch in from the right side of each image.
  • The battery and BIOS chip were removed.
  • Any metal stand offs seen around the edge of the board were use to level the board for scanning.

board top
board bottom