Difference between revisions of "MV2-01"
Jump to navigation
Jump to search
Line 1: | Line 1: | ||
+ | A couple notes on the scans: | ||
+ | * This board was a little wider then my scanner and required stitching 2 scans together. The stitching is about an inch in from the right side of each image. | ||
+ | * The battery was removed and not in the image (top left) | ||
+ | * The BIOS chip was removed so its just the empty socket at SP1 | ||
+ | * On the image of bottom, the metal stand-offs in the corners were to make the board a uniform distance from the scanning bed and are not board of the board. | ||
+ | <br> | ||
+ | |||
{{MvsMotherBoard1Board|mv2|}} | {{MvsMotherBoard1Board|mv2|}} |
Revision as of 02:19, 11 May 2018
A couple notes on the scans:
- This board was a little wider then my scanner and required stitching 2 scans together. The stitching is about an inch in from the right side of each image.
- The battery was removed and not in the image (top left)
- The BIOS chip was removed so its just the empty socket at SP1
- On the image of bottom, the metal stand-offs in the corners were to make the board a uniform distance from the scanning bed and are not board of the board.