BCS - Motherboard AMG0110D

From MVS
Revision as of 03:14, 6 April 2019 by Ack (talk | contribs)
(diff) ← Older revision | Latest revision (diff) | Newer revision → (diff)
Jump to navigation Jump to search

This is a newer revision of the motherboard. Notable changes are:

  • Manually added resistors to the voltage regulator were replaced with onboard R21 and R26 resistors.
  • Variable resistor VR1 (left of the LEDs) was replaced with R12 and R15 resistors
  • C12 (lower left of HYUNDAI ram chip under the VRenderZERO) is populated with a capacitor
  • ZD1 (near power input) is not populated

Set 1

board top
board bottom
Retrieved from "http://www.mvs-scans.com/index.php?title=BCS_-_Motherboard_AMG0110D&oldid=6998"